posición actual:
Casa
>
Centro de productos > Hydrogenated Nitrile-butadiene Rubber (HNBR)
HNBR is a highly saturated elastomer which is treated by catalytic hydrogenation of nitrile rubber(NBR).Compared with NBR, the molecular structure of HNBR contains a small amount or no carbon-carbon double bonds.
Contáctanos Formato PDFWELLANTM HNBR –Introduction
HNBR is a highly saturated elastomer which is treated by catalytic hydrogenation of nitrile rubber(NBR).Compared with NBR, the molecular
structure of HNBR contains a small amount or no carbon-carbon double bonds.The HNBR has better thermal oxygen aging, ozone resistance,
radiation resistance,chemical medium resistance(acid, alkali, methane, refrigerant, hydrogen sulfide) and good dynamicproperties than NBR.
while maintains the oil resistance and wear resistance of NBR.The HNBR is a special rubber with excellent comprehensive properties, which
is a national strategic material.
High-Performance HNBR
WELLANTM from Sundow
Ø High resistance to oil and grease
Ø Ability to function at temperatures from - 40°C to 165°C
Ø Superior performance in aggressive fluids such as power
Ø steering fluids, automatic transmission fluids, engine oils, diesel and brake fluids
Ø Excellent abrasion resistance
Ø Excellent ozone resistance for fully saturated grades. For partially saturated grades only if proper compounded.
WELLANTM HNBR Grades
Grade | ACN% | MooneyML(1+4),100℃ | Hydrogenation Degree（%） | Iodine value（mg/100mg） |
Fully saturated grades (suitable for peroxide crosslinking) | ||||
WELLANTM3535A | 34.5-36.5 | 30-40 | 99 | 5-9 |
WELLANTM3565A | 34.5-36.5 | 60-70 | 99 | 5-9 |
WELLANTM3585A | 34.0-37.0 | 80-90 | 99 | 5-9 |
WELLANTM4065A | 40.5-43.5 | 60-70 | 99 | 5-9 |
WELLANTM4070A | 37.5-40.5 | 65-75 | 99 | 5-9 |
Partially saturated grades (suitable for peroxide and sulfur crosslinking) | ||||
WELLANTM3560B | 34.5-37.5 | 55-65 | 95 | 12-20 |
WELLANTM3580B | 34.5-37.5 | 75-85 | 95 | 12-20 |
WELLANTM3560C | 32.5-35.5 | 55-65 | 90 | 24-32 |
WELLANTM3580C | 32.5-35.5 | 75-85 | 90 | 24-32 |
WELLANTM HNBR - Typical Applications
WELLAN superior line of fully saturated grades with high
heat resistance is suited to seal applications in automotive systems and heavy equipment.
Use WELLAN for:
u wheel bearing seals
u shock absorber seals
u camshaft seals
u power steering assembly seals
u O-rings
u water pump seals
u gearbox shaft seals
u air conditioning system seals
u fuel system seals for diesel and RME coolant seals
WELLAN grades are especially suitable for applications where cold flex cracking is a problem, as in snowmobile belts.
WELLAN partially hydrogenated grades are the right choice in these dynamic applications.
Use WELLAN for:
u air conditioning hoses
u timing belts
u engine mountings
u oil-cooler hoses
u chain tensioning devices
u fuel hoses
u power steering hoses
u high-pressure hydraulic hoses
Medium-high ACN fully saturated grades are ideal for wire and cable applications.
Use WELLAN for:
u protective components for electrical systems
u protective jackets for electrical cables and wires
u blends with EVM/Al(OH)3 for FRNC cable jackets with excellent flame-retardant properties and excellent low temperature properties
Copyright © Sundow Polymers Co., Ltd.-Sundow es un proveedor confiable en el campo del caucho plástico. Lu ICP Prepared 16037505 Declaración Mapa del sitio | RSS | XML
+86-0536-8057068